Vision K1 firmware dump

Perhaps you searched on Google for a way to update Vision K1, or searched on YouTube for flashing and updating Vision K1. You downloaded an incompatible Vision K1 flash file or a damaged update file, and while updating your device, the power was cut off, or the update was completed and your receiver did not boot, so here is a tested dump file for your VISION K1 device, pulled from both sides, free of any problems.

Vision K1 tested Dump bin file

We provide you with a tested dump file for the Vision K1 receiver to fix the problem of the receiver stopping booting due to a defect in the operating software file or the Vision K1 stopping immediately after the update process. The dump firmware file fixes all the problems of the Vision K1 receiver related to a defect in the device’s software, including:

• The receiver stops on the word on or boot on the front of the small display screen. 
• vision k1 stopped on boot logo vision.
•  The receiver spasms after a period of time of operation.
•  Satellites and frequencies disappear from the channel search list.
•  No signal despite the presence of LNB voltage.
•  Channel search failed despite the presence of an LNB signal.
• Change satellite channels automatically without your intervention.
• The receiver stopped booting due to a power outage during the update process. 
• Updating the Vision K1 receiver with an incompatible or damaged version.

All of these faults can be fixed by passing a tested dump software to the Vision K1 receiver, and to help technicians with the repair, we present to you this file that has been tested on more than one K1 receiver for free download. Our motto is against monopoly.

File Size : 4MB