10 tips to maintain your car engine

We rarely think much about a car's engine. Most of us get into the car, turn the key, and drive off; We stop paying attention to the engine only when we notice unusual noises coming from it or when we discover that the car is not running as it was before. 

But periodically, car engines should be checked. To keep them working properly, they require routine maintenance. There are many technologies to protect your car's engine so that it is not susceptible to any malfunctions and works properly for a long time, saving you from paying for additional repairs. Here are ten suggestions. To maintain your car engine:

1.Change the oil regularly:

One of the most important things you can do for your engine is to change the oil frequently. To prevent overheating, the oil keeps the main components of the engine lubricated. The engine will eventually wear out if the oil is not changed after a long time.

Oil change standards fluctuate, but newer standards require newer vehicles to change their oil every 5,000 miles (8,047 kilometers), while older vehicles require more frequent oil changes. To ensure greater engine protection.

We cannot remind you to change the oil without also emphasizing the necessity of changing the oil filter because it is the one that traps all the dirt and debris that is floating around the engine, and if it is clogged with dirt it will allow the dirt and debris to flow back through the engine.

2.Make sure the cooling system is good

The cooling system, which is another component of the engine and consists of the radiator, thermostat, pump, and coolant. Maintaining the proper amount of coolant circulation is the simplest way to prevent engine overheating.

When the thermostat begins to detect that the engine temperature has risen above the acceptable limit and needs to cool, coolant flows throughout the engine. Pumps are used to pump fluid in and out of the engine block. By checking the fluid level inside the radiator, you can ensure that there is enough fluid.

Visit a professional to find out what's wrong with the cooling system if you notice that the temperature of the car is increasing despite having enough coolant.

3.Let the engine breathe

Like humans, a car needs a constant flow of air. Air is the second most important component in an engine after gasoline. Air filters keep unwanted contaminants like dirt and bugs out of the engine, but over time, they become clogged and need to be replaced. Depending on your driving style and road conditions, determine how often you should replace your air filters.

4.Check for leaks

You don't have to be a mechanic to detect fluid leaks in your car. It is visible on the ground. Leaks are usually caused by engine heat and high pressure, which eventually leads to weakening and splitting of hoses, especially older ones. In addition, fluids in the engine may separate. One of the hose connectors.

It's a good idea to regularly check the engine for fluid leaks and look under the car. If you discover even the smallest leak, you need to fix it before the problem gets worse.

10 tips to maintain your car engine

5.Fill the gasoline tank before it is completely empty

Because part of the impurities in the gasoline settles at the bottom of the tank and is blocked from the engine by the gasoline filter, if you continue driving while the tank is almost empty, the engine will start pulling in the impurities and dirt that have accumulated inside the tank. Some of these impurities leak out of the filter and damage the engine.

Some advise refilling the tank when it's half full, but if you don't want to keep buying gasoline, at least don't wait until the tank is almost empty.

6.Replace the fuel filter

We've already discussed how crucial it is to change the gasoline filter in order to preserve engine safety.

7.Put on the rubber belts

The fan, water pump, generator and air conditioner are basic devices for which the rubber belts that control all the basic engine parts are mainly responsible.

These belts also operate when the engine is started. Long-term use of these belts will cause them to break. The engine will suffer serious damage if one of these belts breaks while the vehicle is being driven.

 You should check the belts regularly to ensure their safety by looking for which ones you need to replace if they have cracks or if the engine is screaming.

8.Follow the warning lights inside the car:

This may seem obvious, but failing to check your car when the warning lights come on is regarded as serious negligence. These lights can illuminate for a variety of reasons; an engine problem isn't always the cause, but if a small issue is ignored, it could grow into a bigger one.

9.Changing spark plugs and wires

Change the spark plugs and wires to preserve the engine in a straightforward manner. The spark plugs receive electrical current from the wires, which causes a spark to be produced that ignites the fuel and air in the cylinders. They work incredibly well, but as they age, they may contribute to the engine running more slowly.

Inside the engine, replacing the candles and wires is a simple task that can be completed for not much money. The majority of businesses advise replacing the candles every 30,000 miles. To guarantee the optimal electrical current flow, replace the wires in the engine at the same time you change the spark plugs. Additionally, regular candle and wire replacements ensure that your engine operates smoothly for many years.

10.Start and stop the engine at a low speed

Although the car's engine is built to go quickly, it will function best if it maintains a consistent speed. If you frequently have to abruptly slow down because of road and traffic circumstances, you shouldn't be driving at a high pace. The engine will have a hard time with this. The engine will perform better if you maintain a consistent speed while driving on highways and follow the posted traffic laws.